|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
|
|
--MANUFACTURER-- Acratech Aerosticks AJS Machine Aquacraft Boom Boom Batteries CEN Racing Crescenzi Racing Duratrax Dynamite ESP Extreme Standz Fast Lane FMA Direct Fullforce RC Hexcrews Hitec Hobby Zone HPI Racing Hudy Integy Impact Performance JR King Headz Kyosho Losi Megatech MIP Motor Saver MRC/Academy MSJ New Era Nova Novak O.S. Max Proboat Psycho-Tek Racers Edge RC Driver RC Raven RC Lube RD Logics Redcat Racing Sawtooth RC Schumacher Selective RC Spektrum Spintec SPI Racing Sportwerks Sullivan Products Swami RC Traxxas Truck Stop Racing Venom VR Industries XTM Upcoming Reviews --PRODUCT-- Lower Braces Revo Bumpers Springs Sway Bars Savage Chassis Threaded Insert Kit Toe Links |
|
|
Fullforce RC Holmwrecker's Rear Toe LinksInstallationInstalling the Fullforce toe links will only take a few minutes. The walkthrough below will provide you some information regarding the overall installation, and how simple it is. I apologize for the dirty Maxx used for a walkthrough. However things have been hectic and cleaning time has been very difficult to come by. The first thing you'll need to do is to remove the factory turnbuckle link. At each end is a machine screw. The screw that secures the toe-links to the bearing carrier will also have a nylon-locknut installed on it. Remove these screws, then remove the factory toe-link.
 Then you simply use the screws provided with the Fullforce toe-link kit, or the stock screws, and install the Fulforce toe-links in place of the stock ones you just removed.
 That's all there is to it. If more toe-in is desired than the 0° the links offer, you simply unscrew the rod ends on each side of the toe-link out the same amount until you reach the desired toe setting.
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|