|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
|
|
--MANUFACTURER-- Acratech Aerosticks AJS Machine Aquacraft Boom Boom Batteries CEN Racing Crescenzi Racing Duratrax Dynamite ESP Extreme Standz Fast Lane FMA Direct Fullforce RC Hexcrews Hitec Hobby Zone HPI Racing Hudy Integy Impact Performance JR King Headz Kyosho Losi Megatech MIP Motor Saver MRC/Academy MSJ New Era Nova Novak O.S. Max Proboat Psycho-Tek Racers Edge RC Driver RC Raven RC Lube RD Logics Redcat Racing Sawtooth RC Schumacher Selective RC Spektrum Spintec SPI Racing Sportwerks Sullivan Products Swami RC Traxxas Truck Stop Racing Venom VR Industries XTM Upcoming Reviews --PRODUCT-- Bumpers Chassis Rollcage Springs |
|
|
RC Raven Maxx BumpersInstallationInstalling the RC Raven Maxx bumpers are as simple of an upgrade item as you can get. Even a newcomer to the hobby shouldn't be concerned about making this simple swap. The first step that you'll need to do, is to remove the stock bumpers. Using a 2.0 mm hex wrench, loosen the four screws that secure the bumper to the bumper braces. Notice how worn my stock bumpers are.
 This next step is optional, but it's a very good idea to follow it anyway. Because the RC Raven bumpers are flat, and stock bumpers mounting surfaces are concave, the bumper braces don't mate to the new bumpers perfectly. Using a file, sandpaper, or hobby knife, flatten the ends of the bumper braces. This will provide the best possible mounting surface for the new bumper to rest against.
 To reinstall the bumpers, simply secure the RC Raven bumper down using the screws you removed from the stock bumpers. While you are working on the bumper area, now would be a good time to check your bumper adjustment. If the bumper braces are set too tight, they will not help absorb the impact when a collision occurs.
 Once that is complete, simply replace the bumper on the opposite side of the truck and you're done.
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|